Product Description

Broan LB30 30" Hood Liner Especially Designed to Protect the Exterior Base of a Custom Hood. Fits PM250 and PM390 Inserts 24 Gauge CRS Painted Silver Finish Fits Custom Hood Nominal Widths: 30" and 36" Wipes Clean Easily The "B" or Box Liner is Designed to Fit Into 18" Deep Wood Hood or Cabinet Bottoms Cabinet Mount Custom Application

---

Product Details

• Amazon Sales Rank: #9976 in Home Improvement
• Color: Silver
• Brand: Broan
• Model: LB30
• Number of items: 1
• Dimensions: 4.00" h x 28.43" w x 17.25" l, 5.00 pounds

Features

• Silver
• 24 Gauge CRS
• Wipes clean easily
• The Box liner is designed to fit into 18-Inch deep wood hood or cabinet bottoms

---

Customer Reviews

Most helpful customer reviews

4 of 4 people found the following review helpful.
Does the job
By alooknac
I bought this to go with the Broan PM390 Power Pack Range Hood Insert, Silver. I bought an older home that had an empty-inside wood hood (no over stove cabinet) and thought this liner would slip right in there, we pop the fan in, and that's it. I downloaded all the instructions, spec sheets, etc., I could find online ahead of time.

The instructions (both from the web and from the box) are confusing. We weren't even sure which end was up (looks different in different drawings). My contractor had to call the 800# for advice and that person told him that the insert is not designed to hold up the fan. He said you have to either have a cabinet or build a box. In effect, this liner is just to cover up the wood, protect it, and give a stream-lined look.

After some discussion we decided to just use the liner to hold up the fan and it seems very solid. The liner installs with the opening pointing down (concave), so the bottom of the fan unit ends up 4" above the bottom of the hood and is hidden. I posted some photos.

It's slightly awkward reaching under and/or looking under to locate and move the switches which are on the bottom of the fan unit. I'm sure it will become automatic with use. It seems that the fan and therefore the lights sit further back (nearer to the wall) than when I had a standard under-counter fan unit.

For my situation, this liner combined with the fan were perfect. The finished project looks very professional and was way less costly than a custom hood. It was not possible to find a matching cabinet in order to install a ready-made fan unit off the shelf. The cost for this liner, the very nice fan unit, and labor was less than or equal to what it would have cost for an off-the-shelf fan unit, non-matching over-stove cabinet, and labor.

1 of 1 people found the following review helpful.
YOU NEED THIS ONE FOR SURE.
By BERNARD
IF YOU GOT THE CUSTOM LINER THAT MATCHES THIS PRODUCT THEN YOU FOR SURE HAVE TO GET THIS ONE TO COMPLETE A GREAT ADDITION TO YOUR KITCHEN. ITS VERY SILENT AT LOW AND MEDIUM. A BIG FACTOR IN NOISE IS GONNA BE THE DUCT YOU ARE USING. 4 INCH IS USUALLY THE STANDAR BUT 6 INCH WITH THE BROAN RANGE HOOD THAT GOES WITH THIS LINER IS THE BEST. YOU WONT EVEN HEAR IT. ITS SO SO QUIET. I RECOMEND IT. DEFINETLY!

0 of 0 people found the following review helpful.
Just what I needed.
By alejandro
Good product. Just as advertised. It fit perfect in my kitchen and it looks good. The finish was good. you need to buy the actual fan that goes with this inset.